Product Description
Description: Voltage Monitor Relay • Type: Under Voltage • Coil Voltage: 120 VAC • Contact Configuration: DPDT (2 Form C) • Mounting: Base • Contact Current: 10 Amps
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Function | Voltage Sensor |
| Nominal input voltage | 120VAC |
| Max. input voltage | 135VAC |
| Frequency | 60Hz |
| Power consumption | 2 watts max. |
| Drop-out voltage | 80VAC |
| Pick-up voltage | 84VAC |
| Repeat accuracy | ± 1% (fixed conditions) |
| Repeat accuracy | ± 2% (0°-140° F) |
| Output | DPDT 10A at 240VAC resistive |
| Expected relay life | Mechanical: 10 million operations Electrical:100,000 oper at rated load |
| Reset | Automatic |
| Response time | 28.3ms max. |
| Reset time | 10 seconds |
| Operating temperature | - 20o to +140o F |
| Humidity tolerance | 0-97% without condensation |
| Case material | ABS plastic |
| Weight | 9.4 oz. |
| Series Features |
| MODEL 2602 Voltage Sensor |
| Series Description: The Model 2602 Voltage Sensor is a rapid response device for sensing a low voltage condition on 120VAC, 60Hz, single phase power systems. Operating power is drawn from the same line being monitored. Upon sensing a voltage below 80VAC, the internal relay, which is energized under normal operating conditions, will drop out. The solid-state sensor will respond in one-half of an AC cycle (8.33ms.), plus the flight time of the relay (20ms. max.). When the voltage rises above 84VAC, an internal 10-second timer begins. When the time delay elapses the relay will automatically re-energize. There are no field adjustments or calibrations to the device. |
|