Product Description
Description: Monitors • Current Monitor Relays • Function: Single Phase/Over Current/Under Current • Input Voltage: 230 VAC • Voltage Range: 190-250VAC • Max. Voltage: 260VAC • Frequency : 50-400Hz • Input Current : 1 - 5 Amps • Contact Rating : DPDT 10A at 240VAC resistive
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Function | Single Phase/Over Current/Under Current |
| Input Voltage | 230 VAC |
| Voltage Range | 190-250VAC |
| Max. Voltage | 260VAC |
| Frequency | 50-400Hz |
| Input Current | 1 - 5 Amps |
| Transient Protection | 2500V for 10ms |
| Contact Rating | DPDT 10A at 240VAC resistive |
| Expected Relay Life | Mech: 10 million operations Elec: 100,000 operations at rated load |
| Trip Delay | Adjustable 0.2 to 20 seconds |
| Reset | Automatic, Manual (reset button on case) or Remote Manual |
| Operating Temp | - 20o to +131o F |
| Humidity Tolerance | 0-97% w/o condensation |
| Enclosure Material | ABS Plastic |
| Weight | 15 oz. |
| Series Features |
| MODEL 2732 Single-Phase Current Monitor |
| Series Description: The Model 2732 Single Phase Current Monitor is designed to continuously monitor single-phase AC current. It consists of a solid-state sensing circuit driving an internal electromechanical relay. The Model 2732 has two operating modes: over-current sensing or under-current sensing. The operating mode is selected by means of a slide switch on the monitor. When operating voltage is applied, and the current level is correct according to the operating mode, the relay will energize. A fault condition will cause the OVER/UNDER LED on the monitor to illuminate, and the trip delay will begin. If correct current is restored, the relay remains energized. If current is not restored during the delay period, the relay will de-energize and the red TRIP indicator will illuminate. The Model 2732 has three reset configurations: automatic, manual (add jumper), or manual remote (add switch). The standard model, as provided, will reset automatically. |
|