Product Description
Description: Monitors • Current Monitor Relays • Function: Current Sensitive Relay / Over Current • Operating Voltage: 24VAC/120VAC • Voltage Range: 21-30VAC/100-140VAC • Power Consumption: 0.5W/2.0W • Frequency : 60Hz • Over-current Range : 2-20 amps with 1 pass thru CT 1-10 amps with 2 passes thru CT 0.5-5 amps with 4 passes thru CT • Contacts : SPDT 10A at 240VAC resistive
Product Information | Resources |
|
|
Specifications |
Product Attribute | Attribute Value |
Function | Current Sensitive Relay / Over Current |
Operating Voltage | 24VAC/120VAC |
Voltage Range | 21-30VAC/100-140VAC |
Power Consumption | 0.5W/2.0W |
Frequency | 60Hz |
Over-current Range | 2-20 amps with 1 pass thru CT 1-10 amps with 2 passes thru CT 0.5-5 amps with 4 passes thru CT |
CT Insulation Rating | 600VAC |
Dead Band | ± 1% of trip setting |
Trip Point Repeatability | ± 2% of trip point |
Trip Delay | 0.2 to 2.5 seconds |
Start-up Delay | 0.5 to 6 seconds |
Reset | User selectable - Auto or Manual |
Contacts | SPDT 10A at 240VAC resistive |
Expected Relay Life | Mech: 10 million operations Elec: 100,000 operations at rated load |
Operating Temperature | +32o to +140o F |
Humidity Tolerance | 0-97% without condensation |
Enclosure Material | ABS plastic |
Weight | 12 oz. |
Series Features |
MODEL 2734 Current Sensitive Relay |
Series Description: The Model 2734 Current Sensitive Relay monitors a single-phase AC current for an over-current condition. A top-mounted current transformer (CT) provides complete isolation from the control voltage as well as easy installation. Operation begins when the current being monitored rises to 10% of the trip setting, which initiates the start-up delay. When the delay expires, over-current sensing begins. In the AUTO mode, the Model 2734 resets when current drops below the trip setting. In the MANUAL mode, the unit must be reset by momentarily switching to the AUTO mode, and back, after the current fault is cleared. The TRIPPED LED indicates the output relay status. Current must drop below 10% of the trip setting for the start-up delay to restart. The standard model operates in a non-failsafe mode; if control power is lost, over-current detection is lost. A failsafe option is available, fixed or switchable. An adjustable dead band option is also available. |
|