Product Description
Description: Relays • Alternating Sequencing Relay • Input voltage : 24 VAC 60 Hz • Power Consumption : 0.5 watts max. • Output configuration : SPST • Mounting : Base Mount • Contact Rating : SPST 2A at 240VAC resistive
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input voltage | 24 VAC 60 Hz |
| Power Consumption | 0.5 watts max. |
| Output configuration | SPST |
| Mounting | Base Mount |
| Transient Protection | 2500 VRMS for 10ms |
| Minimum Cycle Time | 100ms |
| Contact Rating | SPST 2A at 240VAC resistive |
| Input Contact Requirement | 0.001 amp at 12VDC |
| Expected Relay Life | Mech: 10 million operations Elec: 100,000 ops at rated load |
| Operating Temperature | -20o to+140o F |
| Humidity Tolerance | 0 - 97% w/o condensation |
| Enclosure Material | ABS plastic |
| Weight | 1.2 lbs. |
| Series Features |
| MODEL 471 Multi-Stage Alternator |
| Series Description: The Model 471 Multi-Stage Alternator is designed to control the operating sequence of multi-stage pumping systems. it can also be used to maintain the desired level of pressure on air compressor systems. Four PUMP SELECT DIP switches located on the front panel allow the alternator to control a single-pump, two-pump, three-pump or four-pump system. Only one switch needs to be set for the total number of pumps in the system. The Model 471 will assure that only the necessary pumps are operating, and that the run time for each pump is approximately equal. Pumps are sequenced first-on and first-off. If the pumping demand requires only one pump at a time, the alternator will start the next pump in sequence each time an input switch is closed. Input switches may be float switches, pressure switches, flow switches, etc. , as required by the application. Potential uses for the Model 471 include water supply systems, sewage disposal plant systems, storage tank filling systems, air compressor systems, irrigation and water recycling systems. |
|