Product Description
|
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input voltage | 240VAC |
| Power Consumption | 6.0 watts max. |
| Output configuration | SPST |
| Mounting | Base Mount |
| Transient Protection | 2500 VRMS for 10ms |
| Delay Between Relay Operations | 5 seconds |
| Output Contact Rating | SPST 5A@240VAC |
| Input Contact Requirement | 0.001 amp@12VDC |
| Expected Relay Life | Mech: 50 million operations Elec: 100,000 ops@rated load |
| Operating Temperature | -20o to+140o F |
| Humidity Tolerance | 0 - 97% w/o condensation |
| Enclosure Material | ABS plastic |
| Weight | 1.0 lbs. |
| Series Features |
| MODEL 442 Multi-Stage Alternator |
| Series Description: The Model 442 Multi-Stage Alternator is designed to control the operating sequence of multi-stage motor/pumping systems. It can also be used to maintain the desired level of pressure-on air compressor systems. Four motor select DIP switches located on the front panel allow the alternator to control a single-motor/pump, two-motor/pump, three-motor/pump or four-motor/pump system. The Model 442 will assure that only the necessary motors/pumps are operating, and that the run time for each motor/pump is approximately equal. Motors are sequenced Sequence-On, Simultaneous-Off . If the motor/pumping demand requires only one motor/pump@a time, the alternator will start the next motor/pump in sequence each time an input switch is closed. Input switches may be float switches, pressure switches, flow switches, etc. , as required by the application. Potential uses for the Model 442 include water supply systems, sewage disposal plant systems, storage tank filling systems, air compressor systems, irrigation and water recycling systems. |
|