Product Description
Description: Relays • Alternating Sequencing Relay • Supply Voltage: 120V AC/DC • Voltage Range: 90 - 130V • Contacts : - • Mounting : 8-pin socket • Toggle: Yes • Max Voltage: 140V • Supply Current: 0.01A • Contacts: 10A at 120VAC resistive
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Supply Voltage | 120V AC/DC |
| Voltage Range | 90 - 130V |
| Contacts | - |
| Mounting | 8-pin socket |
| Toggle | Yes |
| Max Voltage | 140V |
| Supply Current | 0.01A |
| Control Current | 0.001 amp |
| Operating Duty | Continuous |
| Min. Cycle Time | 100ms |
| Contacts | 10A at 120VAC resistive |
| Expected Relay Life | Mech: 10 million operations Elec: 100,000 operations at rated load |
| Operating Temp | +32oF to +140o F |
| Humidity Tolerance | 0 - 97% w/o condensation |
| Enclosure Material | ABS plastic |
| Weight | 4.3 oz. |
| Agency Approvals | UL Recognized (U.S. & Canadian) |
| Series Features |
| MODEL 2611 Alternating Controller |
| Series Description: The Model 2611 Alternating Controller is a microprocessor based controller designed for use where two loads are required to alternate to provide equal run time on the loads. LED indicators show the status of the unitÂ’s three control switch inputs and 2 load outputs. A lead select switch allows the loads to alternate normally in the center position, or disable automatic sequencing and lock in a 1-2 or 2-1 sequence. When a Stop, Lead or Lag switch closes, the corresponding LED on top of the unit will illuminate. When the Stop switch and Lead switch closes, Load 1 or Load 2 will come on and the corresponding green LED will illuminate. If fluid levels continue to rise and the Lag switch closes, the 2nd load will energize. Loads remain energized until the Stop switch opens or a fault condition is detected. See Typical Pump Down Application - SOSO Operation on page 3 for details. |
|