Product Description
Description: Time Delay Relay • Single Shot • Input Voltage : 120 VAC • Timing Range; 0.1 - 3 sec • Mounting ; Surface Mount • Contact Configuration; Solid State - NO • Output Current; 20 Amps • Adjustment; External Adjust • Termination; 0.25in. Male Quick Connect Terminals
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 120 VAC |
| Timing Range | 0.1 - 3 sec |
| Mounting | Surface Mount |
| Contact Configuration | Solid State - NO |
| Output Current | 20 Amps |
| Adjustment | External Adjust |
| Termination | 0.25in. Male Quick Connect Terminals |
| Series Features |
| Single Shot (Pulse Former) THS Series Timing Module |
| Series Description: The THS Series may be used to directly control lamp or heater loads of up to 4,600 W. Applications such as exposure timing and heat sealing timing are made simple with increased life only possible with solid state. |
| Operation: (Single Shot) Input voltage must be applied before and during timing. Upon momentary or maintained closure of the initiate switch (leading edge triggered), the output energizes for a measured interval of time. At the end of the delay, the output de-energizes. Opening or reclosing the initiate switch during timing has no affect on the time delay. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reset occurs when the time delay is complete and the initiate switch opens. Loss of input voltage resets the time delay and output. |
|