Product Description
Description: Time Delay Relay • Single Shot • Input Voltage : 230 VAC • Timing Range; 1 - 100 sec • Mounting ; Surface Mount • Contact Configuration; Solid State - NO • Output Current; 10 Amps • Adjustment; External Adjust • Termination; 0.25in. Male Quick Connect Terminals
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 230 VAC |
| Timing Range | 1 - 100 sec |
| Mounting | Surface Mount |
| Contact Configuration | Solid State - NO |
| Output Current | 10 Amps |
| Adjustment | External Adjust |
| Termination | 0.25in. Male Quick Connect Terminals |
| Series Features |
| Timer - Single Shot THDS Series |
| Series Description: The THDS Series combines accurate timing circuitry with high power solid-state switching. It can switch motors, lamps, and heaters directly without a contactor. You can reduce labor, component cost, and increase reliability with these small, easy-to-use, Digi-Power timers. |
| Operation: (Single Shot) Input voltage must be applied before and during timing. Upon momentary or maintained closure of the initiate switch, the output energizes for a measured interval of time. At the end of the delay, the output de-energizes. Opening or reclosing the initiate switch during timing has no affect on the time delay. The output energizes if the initiate switch is closed when input voltage is applied. Reset: Reset occurs when the time delay is complete and the initiate switch is opened. Loss of input voltage resets the time delay and output. |
|