Product Description
Description: Time Delay Relay • Single Shot • Input Voltage : 120 VAC • Timing Range; 0.3 sec • Mounting ; Surface Mount • Contact Configuration; Solid State - NO • Output Current; 20 Amps • Adjustment; Fixed • Termination; 0.25in. Male Quick Connect Terminals
| Product Information | | Resources |
| Manufacturer | SSAC - Littelfuse | | Product Category | Time Delay Relay | | Product Sub Category | Single Shot | | Series | THDS Series |
| | |
Product Attribute
| Attribute Value
|
| Input Voltage | 120 VAC |
| Timing Range | 0.3 sec |
| Mounting | Surface Mount |
| Contact Configuration | Solid State - NO |
| Output Current | 20 Amps |
| Adjustment | Fixed |
| Termination | 0.25in. Male Quick Connect Terminals |
| Timer - Single Shot THDS Series |
| Series Description: The THDS Series combines accurate timing circuitry with high power solid-state switching. It can switch motors, lamps, and heaters directly without a contactor. You can reduce labor, component cost, and increase reliability with these small, easy-to-use, Digi-Power timers. |
Operation: (Single Shot)
Input voltage must be applied before and during timing. Upon momentary or maintained closure of the initiate switch, the output energizes for a measured interval of time. At the end of the delay, the output de-energizes. Opening or reclosing the initiate switch during timing has no affect on the time delay. The output energizes if the initiate switch is closed when input voltage is applied.
Reset: Reset occurs when the time delay is complete and the initiate switch is opened. Loss of input voltage resets the time delay and output. |
- High load currents up to 20A, 200A inrush
- Fixed or adjustable delays from 0.1s - 1000m
- ±0.5% repeat accuracy
- ±1% factory calibration
- 24, 120, or 230VAC
- Metallized mounting surface for heat transfer
- Totally solid state and encapsulated
|
