Product Description
Description: Time Delay Relay • Single Shot • Input Voltage : 120 VAC • Timing Range; 10 - 1000 min • Mounting; Surface Mount • Contact Configuration; 1C SPDT • Output Current; 10 Amps • Mode of Operation; Retriggerable Single Shot • Logic / Function Type; Energized • Adjustment; External Adjust • Termination; 0.25in. Male Quick Connect Terminals
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 120 VAC |
| Timing Range | 10 - 1000 min |
| Mounting | Surface Mount |
| Contact Configuration | 1C SPDT |
| Output Current | 10 Amps |
| Mode of Operation | Retriggerable Single Shot |
| Logic / Function Type | Energized |
| Adjustment | External Adjust |
| Termination | 0.25in. Male Quick Connect Terminals |
| Series Features |
| Motion Detector KRD9 Digi-Timer Time Delay Relay |
| Series Description: The KRD9 Series microcontroller timing circuit provides excellent repeat accuracy and stability. Cost effective approach for OEM applications that require small size, isolation, reliability, and long life. |
| Operation: (Retriggerable Single Shot) Function Type A (Output Initially De-energized): Input voltage must be applied prior to and during timing. When the initiate switch is closed, (momentary or maintained) the output energizes and the time delay starts. On completion of the delay, the output de-energizes. The unit will time out if S1 remains in the open or closed position for the full time delay. Re-closing the initiate switch resets the time delay and restarts timing; the output remains energized. The output will not energize if the initiate switch is closed when input voltage is applied. Function Type B (Output Initially Energized): Upon application of input voltage, the output energizes and the time delay starts. At the end of the time delay, the load de-energizes. The unit will time out if S1 remains in the open or closed position for the full time delay. Closing (re-closing) the initiate switch resets the time delay and restarts timing; the output remains energized. Reset: The time delay and the output are reset when input voltage is removed. |
|