Product Description
Description: Time Delay Relay • Lockout • Input Voltage : 12 VDC • Timing Range; 1 min • Mounting ; Surface Mount • Contact Configuration; Solid State - NO • Output Current; 1 Amp • Mode of Operation; Lockout • Adjustment; Fixed • Termination; 0.25in. Male Quick Connect Terminals
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 12 VDC |
| Timing Range | 1 min |
| Mounting | Surface Mount |
| Contact Configuration | Solid State - NO |
| Output Current | 1 Amp |
| Mode of Operation | Lockout |
| Adjustment | Fixed |
| Termination | 0.25in. Male Quick Connect Terminals |
| Series Features |
| Lockout Timer TA Series Timing Module |
| Series Description: The TA Series prevents rapid recycling of a compressor. A lockout delay is started when the thermostat opens, or input voltage is lost. Eliminates tripped circuit breakers or blown fuses caused by a locked rotor during short cycling. The TA will not allow the compressor to start when the line voltage is low. Chatter of the compressor relay is eliminated. Because of the fast initiate time, bounce of the thermostat will not be transmitted to the compressor relay coil. New 30 second delay for anti-reversing protection of scroll compressors. |
| Operation: (Lockout) On initial closure of the S1, the compressor relay energizes immediately. When S1 opens or input voltage is interrupted, a lockout time delay is initiated. During this lockout time delay, the compressor relay cannot be energized. The low voltage (brownout) protection prevents energization of the compressor when the line voltage is low. Reset: The lockout time delay cannot be reset. After the time delay is completed, the unit automatically resets. |
|