Product Description
Description: Time Delay Relay • Interval - Delay on Break • Input Voltage : 120 VAC • Timing Range; 15 min • Mounting ; Surface Mount • Contact Configuration; Solid State - NO • Output Current; 20 Amps • Mode of Operation; Interval (Single Pulse on Operate) / Delay on Break (Release) • Adjustment; Fixed • Termination; 0.25in. Male Quick Connect Terminals
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 120 VAC |
| Timing Range | 15 min |
| Mounting | Surface Mount |
| Contact Configuration | Solid State - NO |
| Output Current | 20 Amps |
| Mode of Operation | Interval (Single Pulse on Operate) / Delay on Break (Release) |
| Adjustment | Fixed |
| Termination | 0.25in. Male Quick Connect Terminals |
| Series Features |
| Timer - Interval/Delay-on-Break THD7 Series |
| Series Description: The THD7 utilizes only two terminals connected in series with the load. Interval timing mode is achieved by using a small portion of the AC sine wave allowing sufficient voltage for circuit operation. The THD7 can be used for interval or delay-on-break timing. It is designed to operate large loads directly, such as motors, heater elements, and motor starters. |
| Operation: (Interval): Upon application of input voltage, the output energizes and the time delay begins. The output remains energized throughout the time delay. At the end of the time delay the output de-energizes and remains de-energized until power is removed. Reset: Removing input voltage resets the time delay and the output. (Delay-on-Break): |
|