Product Description
Description: Time Delay Relay • Interval • Input Voltage : 24 VDC • Timing Range; 0.1 - 5 sec • Mounting ; Surface Mount • Contact Configuration; 2C DPDT • Output Current; 10 Amps • Mode of Operation; Interval (Single Pulse on Operate) & Single Shot • Adjustment; Knob Adjust • Termination; 0.25in. Male Quick Connect Terminals
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 24 VDC |
| Timing Range | 0.1 - 5 sec |
| Mounting | Surface Mount |
| Contact Configuration | 2C DPDT |
| Output Current | 10 Amps |
| Mode of Operation | Interval (Single Pulse on Operate) & Single Shot |
| Adjustment | Knob Adjust |
| Termination | 0.25in. Male Quick Connect Terminals |
| Series Features |
| Interval & Single Shot ERDI Econo-Timer Time Delay Relay |
| Series Description: Econo-Timers are a combination of digital electronics andanelectromechanicalrelay. DPDTrelayoutputfor relay logic circuits, and isolation of input to output voltages. For applications such as interval on, pulse shaping, minimum run time, etc. |
| Operation: (Interval) Upon application of input voltage, time delay begins, and output relay energizes. At the end of time delay, output de-energizes until input voltage is removed. Reset: Removing input voltage resets the time delay and the output. (Single Shot) Input voltage must be applied before and during timing. Upon momentary or maintained closure of initiate switch, output relay energizes for time delay. At the end of the delay, output de-energizes. Opening or reclosing initiate switch during timing has no affect on time delay. Output will energize if initiate switch is closed when input voltage is applied. Reset: Reset occurs when time delay is complete & initiate switch is opened. Loss of input voltage resets time delay and output. |
|