Product Description
Description: Time Delay Relay • Delay on Break • Input Voltage : 120 VAC • Timing Range; 0.05 - 1 sec • Mounting ; Plug-In (8-Pin Octal) • Contact Configuration; 1C SPDT • Output Current; 10 Amps • Mode of Operation; Delay on Break (Release) • Adjustment; Onboard (Knob) Adjust • Termination; Plug-In • Time Tolerance; ± 20 %
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 120 VAC |
| Timing Range | 0.05 - 1 sec |
| Mounting | Plug-In (8-Pin Octal) |
| Contact Configuration | 1C SPDT |
| Output Current | 10 Amps |
| Mode of Operation | Delay on Break (Release) |
| Adjustment | Onboard (Knob) Adjust |
| Termination | Plug-In |
| Time Tolerance | ± 20 % |
| Series Features |
| Timer - Delay-on-Break TRB Series |
| Series Description: The TRB Series combines an isolated, 10A electromechanical relay output with analog timing circuitry. False trigger of the TRB by a transient is unlikely because of the complete isolation of the circuit from the line prior to initiation. The initiate contact is common to one side of the line and may be utilized to operate other loads. Installation is easy due to the TRBs industry standard 8 or 11-pin plug-in base wiring. |
| Operation: (Delay-on-Break) Input voltage must be applied before and during timing. Upon closure of the initiate switch, the output relay energizes. The time delay begins when the initiate switch is opened (trailing edge triggered). The output remains energized during timing. At the end of the time delay, the output de-energizes. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output. |
|