Description:Flashers • Solid State Flashers • Input Voltage : 12 VDC • Flash Rate; 150 FPM • Mounting ; Surface Mount • Contact Configuration ; Solid State - NO • Output Current ; 2.5 Amps • Mode of Operation; On / Off Recycling (Pulse Generator) approx. 50% ratio • Adjustment; Fixed • Termination; 0.25in. Male Quick Connect Terminals • Notes:; For Resistive or Incandescent Loads
On / Off Recycling (Pulse Generator) approx. 50% ratio
Adjustment
Fixed
Termination
0.25in. Male Quick Connect Terminals
Notes:
For Resistive or Incandescent Loads
Series Features
DC Flasher FS300 Series Solid State Flasher
Series Description:The FS300 Series Solid State Flashers were specifically designed to operate lamp loads. Their two-terminal series connection feature makes installation easy. The high immunity to line noise and transients makes the FS300 Series ideal for moving vehicle applications. All Solid State construction means reliability and long life.
Operation:Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2.
Totally Solid State No Mechanical Contacts to Arc and Wear
High Surge Capability Designed to Operate Incandescent Lamp Loads
High Noise and Transient Protection
Two-Terminal Series Connection
Encapsulated Protects Against Shock, Vibration, and Humidity
