Product Description
Description: Flashers • Solid State Flashers • Input Voltage : 24 VDC • Flash Rate; 90 FPM • Mounting ; Plug-In (8-Pin Octal) • Contact Configuration ; Solid State - NO • Output Current ; 1 Amp • Mode of Operation; On / Off Recycling (Pulse Generator) approx. 50% ratio • Adjustment; Fixed • Termination; 0.25in. Male Quick Connect Terminals • Notes:; For Inductive, Resistive or Incandescent Loads
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 24 VDC |
| Flash Rate | 90 FPM |
| Mounting | Plug-In (8-Pin Octal) |
| Contact Configuration | Solid State - NO |
| Output Current | 1 Amp |
| Mode of Operation | On / Off Recycling (Pulse Generator) approx. 50% ratio |
| Adjustment | Fixed |
| Termination | 0.25in. Male Quick Connect Terminals |
| Notes: | For Inductive, Resistive or Incandescent Loads |
| Series Features |
| DC Flasher FS200 Series Solid State Flasher |
| Series Description: The FS200 Series may be used to control inductive, incandescent, or resistive loads. Input voltages of 12, 24, 36, 48, or 110 V DC are available. Factory fixed flash rate of 90 flashes per minute or may be ordered with a fixed custom flash rate ranging from 10 ... 180 flashes per minute. Encapsulation provides protection against shock, vibration, and humidity. Uniform performance, high surge current capability, and low RFI, make this series ideal for general industrial applications. |
| Operation: Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2. |
|