Product Description
Description: Flashers • Solid State Flashers • Input Voltage : 120 VAC • Flash Rate; 100 FPM • Mounting ; Bracket • Contact Configuration ; Solid State - NO • Output Current ; 2 Amps • Mode of Operation; On / Off Recycling (Pulse Generator) approx. 50% ratio approx. 50% ratio • Adjustment; Fixed • Type; Halfwave • Notes:; On/Off ratio approximately 50%
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 120 VAC |
| Flash Rate | 100 FPM |
| Mounting | Bracket |
| Contact Configuration | Solid State - NO |
| Output Current | 2 Amps |
| Mode of Operation | On / Off Recycling (Pulse Generator) approx. 50% ratio approx. 50% ratio |
| Adjustment | Fixed |
| Type | Halfwave |
| Notes: | On/Off ratio approximately 50% |
| Series Features |
| Flasher - Low Cost FS100 Series Solid State Flasher |
| Series Description: The FS100 Series may be used to control inductive, incandescent or resistive loads. This series offers a 1 A (fullwave) or a 2 A (halfwave) steady state, 10 A inrush solid state output; and may be ordered with an input voltage of 24 or 120 V AC. The FS100 Series offers a factory fixed flash rate of 75 flashes per minute or may be ordered with a fixed custom flash rate ranging from 45 to 150 flashes per minute. Ideal for OEM applications where cost is a factor. |
| Operation: Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removinginputvoltageresetstheoutput and the sequence to T2. |
|