Product Description
Description: Transducer • Current Transducers • Current Range With LCSC10T12: 0-20A • Input Range (F to E); 0-20mA AC • Mounting ; Din-Rail
| Product Information | | Resources |
| Manufacturer | SSAC - Littelfuse | | Product Category | Transducer | | Product Sub Category | Current Transducers | | Series | DCSA Series |
| | |
Product Attribute
| Attribute Value
|
| Current Range With LCSC10T12 | 0-20A |
| Input Range (F to E) | 0-20mA AC |
| Mounting | Din-Rail |
| Current Transducers |
| Series Description: The DCSA Series is a loop-powered, linear output current transducer that provides an output that is directly proportional to the RMS AC current passing through the LCSC10T12 sensor. The DCSA provides either an analog current or voltage: 4 - 20 mA, 1 to 5VDC, or 2 to 10VDC. Each unit is factory calibrated for monitoring (with the LCSC10T12 connected)inoneoffourranges;0-5,0-10,0-20, or 0 - 50A. Zero and span adjustments allow field calibration if needed. The DCSA mounts on both DIN 1 and DIN 3 rails. |
| Operation: The DCSA Series varies the effective resistance of its output in direct proportion to the current flowing in the conductor monitored by the LCSC10T12. Connecting the power supply to terminals C & D provides a 4 to 20mA DC current. Connect the power supply to terminals C & A to get 1 to 5VDC at terminal D. Connect the power supply to terminals C & B to get 2 to 10VDC at terminal D. |
- Mounts on DIN 1 or DIN 3 rail
- 0 - 50A in 4 ranges using LCSC10T12 sensor
- Loop powered from 10 to 30VDC
- Linear output from 4 - 20mA, 1 - 10VD
- Zero & span adjustments
- Separate sensor & control unit
|
