Product Description
Description: Signal Relays • Coil Voltage: 24 VDC • Contact Arrangement: 2C DPDT • Max. Switching Current: 7.5 A (Inrush) • Operating Function : Single side stable • Terminal Type: SMT • Rated Operating Power : 140mW • Protective Construction: Sealed Type • Surface-Mount Terminal Type: SA type • Contact Type: Power type • Contact Material: Ag+Au plating
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Coil Voltage | 24 VDC |
| Contact Arrangement | 2C DPDT |
| Max. Switching Current | 7.5 A (Inrush) |
| Operating Function | Single side stable |
| Terminal Type | SMT |
| Rated Operating Power | 140mW |
| Protective Construction | Sealed Type |
| Surface-Mount Terminal Type | SA type |
| Contact Type | Power type |
| Contact Material | Ag+Au plating |
| Pick-Up Voltage | 75%V or less of nominal voltage (Initial) |
| Input side: Drop-out Voltage | 10%V or more of nominal voltage (Initial) |
| Nominal Switching Capacity (Resistive Load) | 2A 30V DC, 0.5A 125V AC |
| Min. Switching Capacity | 10µA 10mV DC |
| Breakdown Voltage (Initial) : Between Open Contacts | 1,000 Vrms for 1min. (Detection current: 10mA.) |
| Breakdown Voltage (Initial) : Between Contact And Coil | 2,000 Vrms for 1min. (Detection current: 10mA.) |
| Breakdown Voltage (Contact-Contact) (Initial) | 1,000 Vrms for 1min. (Detection current: 10mA.) |
| Surge Breakdown Voltage (Initial): Between Open Contacts | 1,500 V (10 x 160µs) (FCC Part 68) |
| Surge Breakdown Voltage (Initial): Between Contacts and Coil | 2,500 V (2 x 10µs) (Telcordia) |
| Expected Life: Mechanical | Min. 108 (at 180 cpm) |
| Expected Life: Electrical | Min. 105 (2 A 30 V DC resistive), 5×105 (1 A 30 V DC resistive), Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm) Min. 2×105 [7.5 A inrush (250 ms)/1.5 A normal 30 V AC (cos?= 0.4)] (ON/OFF = 1s/9s) |
| Conditions | Ambient temperature: 40 to +85°C 40 to +185°F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) |
| Set Voltage | - |
| Reset Voltage | - |
| Max.switching current (*) | Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required. |
| Series Features |
| TX SERIES RELAYS TH TYPE |
| Series Description: Panasonic TX-TH Series Signal Relays provide different signal switching circuits by using twin crossbar contacts which ensure high switching reliability. The contacts also come standard with gold plating to reduce the potential of oxidation and silver-palladium (AgPd) for use in low-level load analog circuits. Available as a 2FormC contact arrangement, this Series offers single side stable as well as either single or double coil latching drive types. The TX-TH Series Signal Relays also features surface mount or through-hole terminals and coil voltages which range from 1.5 up to 48V DC. The TX-TH Series Signal Relays are also capable of handling inrush currents up to 7.5A typically required by such applications as thermostats. |
| Applications: Air Conditioning Control - Solenoid; Other High Capacity Control |
|