Product Description
| This product has been Discontinued |
Description: Power Relays • Coil Voltage: 5VDC • Contact Form: 1A SPST-NO • Contact Rating (Current): 20 A • Mounting Type: Through Hole • Coil Type: Non Latching • Features: Slim TMP type • Termination Style: PC Pin, Quick Connect - 0.250" (6.3mm)
| Product Information | | Resources |
Product Attribute
| Attribute Value
|
| Mounting Type | Through Hole |
| Coil Voltage | 5VDC |
| Contact Form | 1A SPST-NO |
| Contact Rating (Current) | 20 A |
| Switching Voltage | 250VAC - Max |
| Coil Current | 180 mA |
| Coil Type | Non Latching |
| Features | Slim TMP type |
| Termination Style | PC Pin, Quick Connect - 0.250" (6.3mm) |
| Seal Rating | Sealed - Flux Protection |
| Coil Insulation | - |
| Must Operate Voltage | 3.5 VDC |
| Must Release Voltage | 0.5 VDC |
| Operate Time | 20 ms |
| Release Time | 10 ms |
| Operating Temperature | -40°C ~ 60°C |
| Contact Material | Silver Alloy |
| JM RELAY - COMPACT POWER RELAY FOR INDUCTIVE LOAD |
- Compact, high-capacity, and resistant to inductive loads It can control an inductive load with inrush current of 80 A and steady state current of 20 A
- Excellent contact welding resistance High contact pressure, a forced opening mechanism, and a forced wiping mechanism realizes an excellent contact welding resistance.
- High breakdown voltage and surge resistant relay More than 6.4 mm .252 inch maintained for the insulation distance between contacts and coil, and the breakdown voltage between contacts and coil is 5,000 V for 1 minute. In addition, the surge resistance between contacts and coil is greater than 10,000 V.
- Resistant to external force An absorber mechanism is used on the load terminals, giving a large improvement in characteristics variations caused by the external force during FASTON placement/removal.
- Flux resistance mechanism The terminal area is plugged with resin to prevent flux seepage during PCB mounting. (TMP type)
- Conforms to the various safety standards UL, CSA, VDE and TÜV available
- The line up can support economical mounting methods. The relay are equipped with a drive terminal (coil terminal) on one side for PCBs, and a load terminal (tab terminal #250) on the reverse side. The line up includes the TM type which can be attached directly to the PCB composing a drive circuit, and the TMP type which supports economical wiring. The TMP type can also be directly attached, and a high capacity load can be wired to the tab terminal.
|
