Product Description
Description: Power Relays • Rated Coil Voltage: 12 VDC • Contact Arrangement: 1A SPST-NO • Contact Current: 5 A • Operating Function : Single side stable • Terminal Type: PC Board • Protective Construction: Sealed • Contact Shape: Twin • Relay Shape : Slim type
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Rated Coil Voltage | 12 VDC |
| Contact Arrangement | 1A SPST-NO |
| Contact Current | 5 A |
| Operating Function | Single side stable |
| Terminal Type | PC Board |
| Protective Construction | Sealed |
| Contact Shape | Twin |
| Relay Shape | Slim type |
| Insulation Distance | [Between contact and coil] Clearance: Min. 5.29 mm, Creepage: Min. 5.35 mm |
| Accessories | Sockets are available. |
| Operate Voltage (@20oC) | Max. 70% V of rated coil voltage (Initial) |
| Release Voltage (at20°C) | Min. 5% V of rated coil voltage (Initial) |
| Rated Operating Current [±10%] (at 20°C) | 9.2 mA |
| Resistance [±10%] (at 20°C) | 1,309 ? |
| Rated Operating Power | 110 mW |
| Max. Allowable Voltage (at 20°C 68°F) | 120% V of rated coil voltage |
| Contact Resistance (Initial) | Max. 30 m? (by voltage drop 6 V DC 1 A) |
| Contact Material | AgNi type + Au |
| Max. Switching Power (Resistive Load) | 1,250 VA, 150 W |
| Contact Rating (Resistive Load) | 5 A 250 V AC, 5 A 30 V DC |
| Max. Switching Voltage | 250 V AC, 110 V DC (0.4 A) |
| Max. Switching Current | 5 A (AC, DC) |
| Min. Switching Load (Reference Value) | 100 µA 100 mV DC |
| Insulation Resistance (Initial) | Min. 1,000 M? (at 500 V DC, Measured portion is the same as the case of dielectric strength.) |
| Dielectric Strength (Initial): Between Open Contacts | 1,000 Vrms for 1 min (detection current: 10 mA) |
| Dielectric Strength (Initial): Between Contact and Coil | 3,000 Vrms for 1 min (detection current: 10 mA) |
| Surge Withstand Voltage (Initial): Between Contact and Coil | 6,000 V |
| Release Time (Initial) (at 20°C) | Max. 5 ms at rated coil voltage (without bounce, without diode) |
| Operate Time (Initial) (At 20oC) | Max. 10 ms at rated coil voltage (without bounce) |
| Hock Resistance (Functional) | 147 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) |
| Hock Resistance (Destructive) | 980 m/s2 (half-sine shock pulse: 6 ms) |
| Vibration Resistance (Functional) | 10 to 55 Hz (at double amplitude of 2.5 mm, detection time: 10 µs) |
| Vibration Resistance (Destructive) | 10 to 55 Hz (at double amplitude of 3.5 mm) |
| Conditions | Ambient temperature: -40 to +90°C (Allowable temperature is from -40 to +60°C at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation) |
| Mechanical Life | Min. 20x106 ope. (switching frequency: at 180 times/min) |
| Resistive Load | [switching frequency: 20 times/min] Min. 100x103 ope. 3 A 250 V AC Min. 100x103 ope. 3 A 30 V DC AO6[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s] Min. 50x103 ope. 5 A 250 V AC [switching frequency: 20 times/min] Min. 50x103 ope. 5 A 30 V DC |
| Inductive Load | [switching frequency: 6 times/min, ON : OFF = 1 s : 9 s] Min. 100x103 ope. 2 A 250 V AC (cos? = 0.4) |
| Series Features |
| PA-N SERIES RELAYS |
| Series Description: Panasonics PA-N Series Relays achieves a high breakdown voltage of 3,000 V, excellent shock resistance, and low power consumption. The PA-N Series products are suitable to switch a maximum of 5A at 250 V AC and 30 V DC. These slim 1 Form A Relays comply with the new PLC safety standard IEC61010 reinforced insulation. The PA-N Series has been developed to comply with the International Electromechanical Commission (IEC) standards and is certified to the Underwriters Laboratories (UL) Inc.s standards for programmable logic controllers used to control production facilities at factories. PLC manufacturers are urgently developing products to meet new safety standards, and highly reliable products compliant with the new standards are being sought for relays that control the output from PLCs. In response to these developments, Panasonic has modified the internal structure of the PA-N Series Relays to improve its breakdown voltage from 2,000 V to 3,000 V to make it compatible with the new standards. The PA-N Series is ideal for use in industrial and office equipment, measuring devices, test equipment applications, and more. |
| Applications: Industrial equipment, office equipment, Measuring devices and test equipment, Output relays for programmable controllers and temperature controllers |
|