Product Description
Description: Signal Relay • Coil Voltage: 5 VDC • Contact Configuration: 2C DPDT • Current: 2 Amps • Function: Single Side Stable • Mounting: PC Board • Sealed: Yes
| Product Information | | Resources |
Product Attribute
| Attribute Value
|
| Coil Voltage | 5 VDC |
| Contact Configuration | 2C DPDT |
| Current | 2 Amps |
| Function | Single Side Stable |
| Mounting | PC Board |
| Sealed | Yes |
| Contact Material | silver-nickle ally with gold overlay |
| Minimum Contact Ratings | 100 m VDC, 100 ?A |
| Initial Contact Resistance | 50 mOhm typical |
| Operate Time (Excluding bounce) | Approx. 3.5 ms without diode |
| Release Time (Excluding bounce) | Approx. 2 ms without diode |
| Insulation Resistance | 1000 M ohms at 500 VDC |
| Withstanding Voltage | Between open contacts: 1000 VAC (for one minute)
Between adjacent contact: 1000 VAC (for one minute)
Between coil and contacts: 1000 VAC (for one minute) , 1500 V surge (10x160 ?s) |
| Shock Resistance | 294 m/s2 (75G) (misoperation)
980 m/s2 (100G) (destructive failure) |
| Vibration Resistance | 10 to 55 Hz, double amplitude 1.5 mm (misoperation)
10 to 55 Hz, double amplitude 5 mm(destructive failure) |
| Ambient Temperature | -40 to +85°C |
| Coil Temperature Rise | 20°C |
| MR602 Series |
| Series Description: The NEC MR602 offers such characteristics as, low power consumption, and igh breakdown voltage in a compact through hole design. The MR602 is available in a polarized 2 for C (DPDT) or a 2 form D (DPDT-MB) contact arrangement in a through hole DIP terminal design |
- Low power consumption
- Small package for automatic insertion
- Plastic sealed for wave soldering
- Variation (single side stable bistable operations , form C or D contacts)
- 1500 V FCC surge, 1000 VAC breakdown voltage
- Tubes for Automated insertion machine
- Stable contact resistance at high temperature ( at 85degC)
- UL recognized (E73266), CSA certified (LR46266)
|
