Product Description
Description: Power Relay • Coil Voltage: 12 VDC • Contact Configuration: 1C SPDT • Current: 30 Amps • Function: Single Side Stable • Mounting: PC Board • Sealed: No • Coil Resistance: 160 Ohm
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Coil Voltage | 12 VDC |
| Contact Configuration | 1C SPDT |
| Current | 30 Amps |
| Function | Single Side Stable |
| Mounting | PC Board |
| Sealed | No |
| Coil Resistance | 160 Ohm |
| Contact Material | Silver oxide complex alloy |
| Operate Time (Excluding bounce) | 2.5 ms typical (at Nominal Voltage) |
| Release Time (Excluding bounce) | 3 ms typical (at Nominal Voltage, with diode) |
| Nominal Operating Power | 900 mW |
| Insulation Resistance | 100 M ohms at 500 VDC |
| Withstanding Voltage | Between open contacts: 500 VAC (for one minute)) Between coil and contacts: 500 VAC (for one minute) |
| Shock Resistance | 98 m/s2 (misoperation) 980 m/s2 (destructive failure) |
| Vibration Resistance | 10 to 300 Hz, 43 m/s2(Misoperation) 10 to 500 Hz, 43 m/s2, 200 hours(Destructive Failure) |
| Ambient Temperature | -40 to +85 °C |
| Series Features |
| EX2/EX1 SERIES |
| Series Description: The new NEXEM EX2/EX1 series is PC-board mount type and the most suitable for various motor and heater controls in the automobiles which require high quality and high performance. The EX2 series is succeeding in about 60% of miniaturization in comparison with the ET2 series. The EX1 series is succeeding in about 50% of miniaturization in comparison with the ET1 series. |
| Applications: Motor control, Solenoid control |
|