Product Description
Description: Power Relay • Coil Voltage: 12 VDC • Contact Configuration: 2x1C 2xSPDT • Current: 25 Amps • Function: Single Side Stable • Mounting: PC Board • Sealed: Yes • Coil Resistance: 225 Ohm
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Coil Voltage | 12 VDC |
| Contact Configuration | 2x1C 2xSPDT |
| Current | 25 Amps |
| Function | Single Side Stable |
| Mounting | PC Board |
| Sealed | Yes |
| Coil Resistance | 225 Ohm |
| Contact Material | Silver oxide complex alloy |
| Operate Time (Excluding bounce) | 2.5 ms typical (at Nominal Voltage) |
| Release Time (Excluding bounce) | 3 ms typical (at Nominal Voltage, with diode) |
| Nominal Operating Power | 640 mW |
| Insulation Resistance | 100 M ohms at 500 VDC |
| Withstanding Voltage | Between open contacts: 500 VAC (for one minute)) Between coil and contacts: 500 VAC (for one minute) |
| Shock Resistance | 98 m/s2 (misoperation) 980 m/s2 (destructive failure) |
| Vibration Resistance | 10 to 300 Hz, 43 m/s2(Misoperation) 10 to 500 Hz, 43 m/s2, 200 hours(Destructive Failure) |
| Ambient Temperature | -40 to +85 °C (?40 to +185 °F) |
| Series Features |
| ET2/ET1 SERIES |
| Series Description: The new NEXEM ET2/ET1 series is PC-board mount type automotive relay suitable for various motor and heater control applications that require a high quality and performance. The ET2/ET1 series is the relay that succeeds fundamental structure and performance of the NEXEM EP2/EP1 series that has the high share with a motor control usage of the automobile of the world. Besides the ET2/ET1 series is succeeding in about 50% of miniaturization in comparison with the EP2/EP1 series. |
| Applications: Motor control, Heater control, Solenoid control |
|