Product Description
Description: Power Relay • Coil Voltage: 12 VDC • Contact Configuration: 2x1C 2xSPDT • Current: 30 Amps • Function: Single Side Stable • Mounting: PC Board • Sealed: Yes • Coil Resistance: 225 Ohm
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Coil Voltage | 12 VDC |
| Contact Configuration | 2x1C 2xSPDT |
| Current | 30 Amps |
| Function | Single Side Stable |
| Mounting | PC Board |
| Sealed | Yes |
| Coil Resistance | 225 Ohm |
| Contact Material | Silver oxide complex alloy type II |
| Operate Time (Excluding bounce) | 5 ms typical (at Nominal Voltage) |
| Release Time (Excluding bounce) | 2 ms typical (at Nominal Voltage, without diode) |
| Nominal Operating Power | 0.48 W/ 0.64 W (at 12 VDC) |
| Insulation Resistance | 100 M ohms at 500 VDC |
| Withstanding Voltage | 500 VAC (for 1 minute) |
| Shock Resistance | 98 m/s2 (misoperation) 980 m/s2 (destructive failure) |
| Vibration Resistance | 10 to 300 Hz, 43 m/s2(Misoperation) 10 to 500 Hz, 43 m/s2, 200 hours(Destructive Failure) |
| Ambient Temperature | -40 to +85 °C (?40 to +185 °F) |
| Series Features |
| EP2 Series |
| Series Description: EP2 series is printed circuit board mount type and the most suitable for various motor controls in the automotive which require high-quality and high-performance. EP2 series has two types for different applications. One is H bridge type which is designed for forward and reverse control of the motor. The other is separate type which contains two separated relays in one package. |
|