Product Description
Description: Power Relay • Coil Voltage: 12 VDC • Contact Configuration: 1C SPDT • Current: 30 Amps • Function: Single Side Stable • Mounting: PC Board • Sealed: No • Coil Resistance: 225 Ohm
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Coil Voltage | 12 VDC |
| Contact Configuration | 1C SPDT |
| Current | 30 Amps |
| Function | Single Side Stable |
| Mounting | PC Board |
| Sealed | No |
| Coil Resistance | 225 Ohm |
| Contact Material | Silver oxide complex alloy |
| Operate Time (Excluding bounce) | 5 ms typical (at Nominal Voltage) |
| Release Time (Excluding bounce) | 2 ms typical (at Nominal Voltage, without diode) |
| Nominal Operating Power | .64W |
| Insulation Resistance | 100 M ohms at 500 VDC |
| Withstanding Voltage | Between open contacts: 500 VAC (for 1 minute) Between coil and contacts: 500 VAC min. (for 1 minute) |
| Shock Resistance | 98 m/s2 (misoperation) 980 m/s2 (destructive failure) |
| Vibration Resistance | 10 to 300 Hz, 43 m/s2(Misoperation) 10 to 500 Hz, 43 m/s2, 200 hours(Destructive Failure) |
| Ambient Temperature | -40 to +85 °C |
| Series Features |
| EP1K Series |
| Series Description: The NEXEM EP1K series is PC-board mount automotive relay suitable for control of heaters, fans and pumps, etc. The EP1K relay was developed based on the EP1 relay, and the performance of carrying current is about 10A larger than the EP1 relay. |
|