Product Description
Description: Power Relay • Coil Voltage: 12 VDC • Contact Configuration: 1U SPST-NO DM • Current: 100 A • Function: Single Side Stable • Mounting: PC Board • Sealed: Yes • Coil Resistance: 225 Ohm
| Product Information | | Resources |
| Manufacturer | NEC - World Products | | Product Category | Relay | | Product Sub Category | Power Relay | | Series | EM1 Series |
| | |
Product Attribute
| Attribute Value
|
| Coil Voltage | 12 VDC |
| Contact Configuration | 1U SPST-NO DM |
| Current | 100 A |
| Function | Single Side Stable |
| Mounting | PC Board |
| Sealed | Yes |
| Coil Resistance | 225 Ohm |
| Contact Material | Silver oxide complex alloy |
| Operate Time (Excluding bounce) | 4 ms typical (at Nominal Voltage) |
| Release Time (Excluding bounce) | 1 ms typical (at Nominal Voltage, without diode) |
| Nominal Operating Power | 640 mW |
| Insulation Resistance | 100 M ohms at 500 VDC |
| Withstanding Voltage | Between open contacts: 500 VAC (for 1 minute)
Between coil and contacts: 500 VAC min. (for 1 minute) |
| Shock Resistance | 98 m/s2 (misoperation)
980 m/s2 (destructive failure) |
| Vibration Resistance | 10 to 300 Hz, 43 m/s2(Misoperation)
10 to 500 Hz, 43 m/s2, 200 hours(Destructive Failure) |
| Ambient Temperature | -40 to +125 °C |
| EM1 Series |
| Series Description: The NEXEM EM1 series is PC-board mount automotive relay suitable for control of lamps, C-R circuits, heaters, fans and pumps, etc. The EM1 series has higher switching performance than current relays; EP1, ET1, EX1 series. |
- Suitable for large inrush current load, such as lamps and CR-circuits, etc.
- Large current capacity (54A 1hour at 20°C)
- High heat resistance
- Flux tight housing
- Through-hole refl ow soldering available
|
RoHS Compliant