Product Description
Description: Power Relay • Coil Voltage: 12 VDC • Contact Configuration: 1C SPDT • Current: 100 A • Function: Single Side Stable • Mounting: PC Board • Sealed: No • Coil Resistance: 225 Ohm
| Product Information | | Resources |
| Manufacturer | NEC - World Products | | Product Category | Relay | | Product Sub Category | Power Relay | | Series | EL1 Series |
| | |
Product Attribute
| Attribute Value
|
| Coil Voltage | 12 VDC |
| Contact Configuration | 1C SPDT |
| Current | 100 A |
| Function | Single Side Stable |
| Mounting | PC Board |
| Sealed | No |
| Coil Resistance | 225 Ohm |
| Contact Material | Silver oxide complex alloy |
| Operate Time (Excluding bounce) | 4 ms typical (at Nominal Voltage) |
| Release Time (Excluding bounce) | 1 ms typical (at Nominal Voltage, without diode) |
| Nominal Operating Power | 640 mW |
| Insulation Resistance | 100 M ohms at 500 VDC |
| Withstanding Voltage | Between open contacts: 500 VAC (for 1 minute)
Between coil and contacts: 500 VAC min. (for 1 minute) |
| Shock Resistance | 98 m/s2 (misoperation)
980 m/s2 (destructive failure) |
| Vibration Resistance | 10 to 300 Hz, 43 m/s2(Misoperation)
10 to 500 Hz, 43 m/s2, 200 hours(Destructive Failure) |
| Ambient Temperature | -40 to +125 °C |
| EL1 Series |
| Series Description: The NEXEM EL1 series is PC-board mount automotive relay suitable for control of various motor, solenoidal coil and power supply etc. The EL1 series has higher switching and carrying current performance than existing relays, EP1,ET1 and EX1 series. |
- Suitable for inductive load and large current interruption
- Changing-over circuit available by Form C contacts
- Large current capacity (54A 1hour at 20? )
- High heat resistance
- Flux tight housing
- Through-hole refl ow soldering available
|
RoHS Compliant