Product Description
Description: Automotive Relay • Coil Voltage: 12 VDC • Contact Configuration: 1C SPDT • Current: 25 A • Function: Single Side Stable • Mounting: PC Board • Sealed: No • Operate Voltage: 7.0 V (max) • Wiring: Separate Type • Contact Material: Silver oxide complex alloy
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Coil Voltage | 12 VDC |
| Contact Configuration | 1C SPDT |
| Current | 25 A |
| Function | Single Side Stable |
| Mounting | PC Board |
| Sealed | No |
| Operate Voltage | 7.0 V (max) |
| Wiring | Separate Type |
| Coil Resistance | 225 Ohm |
| Contact Material | Silver oxide complex alloy |
| Operate Time (Excluding bounce) | 5 ms typical (at Nominal Voltage) |
| Release Time (Excluding bounce) | 2 ms typical (at Nominal Voltage, without diode) |
| Nominal Operating Power | .64W |
| Insulation Resistance | 100 M ohms at 500 VDC |
| Withstanding Voltage | Between open contacts: 500 VAC (for 1 minute) |
| Shock Resistance | 98 m/s2 (misoperation) 980 m/s2 (destructive failure) |
| Vibration Resistance | 10 to 300 Hz, 43 m/s2(Misoperation) 10 to 500 Hz, 43 m/s2, 200 hours(Destructive Failure) |
| Ambient Temperature | -40 to +85 °C |
| Series Features |
| EP2F/EP1F SERIES |
| Series Description: The NEXEM EP2F / EP1F series are PC-board mount type automotive relays suitable for various motor controls and other applications that require a high level of quality and performance. The operate temperature range for EP2F / EP1F series is 40°C through +125°C. By this high heat resistivity, the contact carrying current of EP2F / EP1F series at 25°C increases 1.3 or 1.4 times compared with that of EP2 / EP1 series. |
| Applications: Power window control, Power sunroof, Wiper system |
|