Get A Quote
My Account
To ensure accuracy, please note that images may be representative. Refer to the product data sheet for detailed specifications.
| Manufacturer | Mersen / Ferraz Shawmut |
| Manufacturer Product Number | 510TPMOV-HV |
| Description | Surge Protection Device; 510 V AC; HV micro-switch |
| Datasheet | Download Datasheet |
The Mersen / Ferraz Shawmut 510TPMOV-HV is a UL Type 1 surge protection device: component (thermally protected MOV) for OEM SPD design.
A UL Type 1 SPD is permanently connected and may be installed on the line side of the service disconnect as well as the load side.
Maximum continuous operating voltage (MCOV / Uc): 510 V AC. Voltage protection rating (UL VPR): 1500 V. Nominal discharge current (In): 20 kA. Maximum discharge current (Imax): 50 kA (8/20 µs surge capacity). Short circuit current rating (SCCR): 200 kA.
Status indication: visual pin indicator (visual tabs). Monitoring: remote contact consult factory for details. Back-up fuse: Not required (no additional overcurrent protective device required). Response time Less than 1 nanosecond (one per phase).
Connection: No PCB leads. It operates from -40 °C to +85 °C (-40 °F to +185 °F) °C.
Approvals: cURus (UL Recognized), RoHS.
| Category | |
| Manufacturer | Mersen / Ferraz Shawmut |
| Model | TPMOV |
| SPD Type | UL 1449 Type 1 Component Assembly (1CA) |
| Product Form | Component (thermally protected MOV) for OEM SPD design |
| Max Continuous Operating Voltage | 510 V AC |
| Voltage Protection Rating | 1500 V |
| Nominal Discharge Current | 20 kA |
| Maximum Discharge Current | 50 kA (8/20 µs surge capacity) |
| Short Circuit Current Rating | 200 kA |
| Status Indication | Visual pin indicator (visual tabs) |
| Remote Contact | HV micro-switch |
| Thermal Protection | Yes (thermally protected MOV with internal disconnect and arc shield) |
| Alarms / Monitoring | Remote contact consult factory for details |
| Back-up Fuse | Not required (no additional overcurrent protective device required) |
| Response Time | Less than 1 nanosecond (one per phase) |
| Connection | No PCB leads |
| Operating Temperature (°C) | -40 °C to +85 °C (-40 °F to +185 °F) |
| Approvals | cURus (UL Recognized), RoHS |