Product Description
|
| Product Information | Resources |
|
|
RoHS CompliantDescription: Seal Monitor • Number of Channels: Dual Channel • Control Voltage: 24 VAC • Contact Configurtation: (2) 1A SPST-NO • Mounting: 8 Pin Plug-in • Sensitivity Range: 1K to 250KΩ
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Number of Channels | Dual Channel |
| Control Voltage | 24 VAC |
| Contact Configurtation | (2) 1A SPST-NO |
| Mounting | 8 Pin Plug-in |
| Sensitivity Range | 1K to 250KΩ |
| Load (Burden) | 3 VA |
| Probe Voltage | 5V DC Pulsed |
| Response Time | Pick-up: 1 Second Drop-out: 1 Second |
| LED Indicator | Green ON with input voltage applied; Red ON when seal leak detected and relay energized |
| Temperature | Operating: -28o to 65oC (-18o to 149oF) Storage: -40o to 85oC (-40o to 185oF) |
| Output Contacts | Single Channel Relays: 10A @ 240V AC / 7A @ 28V DC, 1/4HP @ 120V AC (N.O.) Dual Channel Relays: (2) 5A @ 240V AC / 5A @ 28V DC, 1/4HP @ 120V AC (N.O.) |
| Life | Mechanical: 10,000,000 operations Full Load: 100,000 operations |
| Mounting | For mounting on an inner door, use 8 Pin Back-Mounted Socket (IDEC SR6P-M08G which is provided with the relay). For panelmounting, use industry-standard 8 Pin Octal socket (Macromatic 70169-D or equivalent). |
| Series Features |
| SFF Series SEAL LEAKAGE Single & Dual Channel |
| Series Description: SFF Series Seal Leakage Relays are designed to monitor the shaft seals of submersible pumps for leakage. These products utilize a flange-enclosure designed to be mountedon an inner door and used with back-mounted sockets. Everything needed for setup, use and troubleshooting is on the top of the unit: LED status indication and low-profile sensitivity adjustment knob. Two output configurations are offered: an 8 pin SPDT single channel relay and an 8 pin dual channel relay (with 2 SPNO contacts) to monitor two pumps. Probes are pulsed with a DC voltage to prevent electroplating issues. |
| Operation: Flange Enclosure for Door-Mounting |
|
| Series Features |
| SFF Series SEAL LEAKAGE Single & Dual Channel |
| Series Description: SFF Series Seal Leakage Relays are designed to monitor the shaft seals of submersible pumps for leakage. These products utilize a flange-enclosure designed to be mountedon an inner door and used with back-mounted sockets. Everything needed for setup, use and troubleshooting is on the top of the unit: LED status indication and low-profile sensitivity adjustment knob. Two output configurations are offered: an 8 pin SPDT single channel relay and an 8 pin dual channel relay (with 2 SPNO contacts) to monitor two pumps. Probes are pulsed with a DC voltage to prevent electroplating issues. |
| Operation: Flange Enclosure for Door-Mounting |
|