Product Description
Description: Phase Monitor Relays • Type: Reversal • Coil Voltage: 190-500V • Contact Configuration: 1C SPDT • Mounting: 8 Pin Plug-in • Contact Current: 10 Amps • Indicator LED: See Datasheet
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Type | Reversal |
| Coil Voltage | 190-500V |
| Contact Configuration | 1C SPDT |
| Mounting | 8 Pin Plug-in |
| Contact Current | 10 Amps |
| Indicator LED | See Datasheet |
| Min Voltage | 156V AC |
| Max Voltage | 550V AC |
| Power Consumption | Less than 40VA |
| Phase Reversal (Sequence) | Unit trips if rotation (sequence) of the three phases is anything other than A-B-C. It will not work on C-B-A. |
| Response Times | Power Up & Restart After Fault: 1 second fixed Drop-out Due to Phase Reversal: 100ms fixed |
| Output Contacts | SPDT 10 A @ 277V AC / 7A @ 30V DC; 1HP @ 250V AC, 1/2HP @ 125V AC; C300 Pilot Duty |
| Life | Mechanical:10,000,000 operations; Full Load: 100,000 operations |
| Temperature | Operating: -28o to 65oC (-18o to 149oF) Storage: -40o to 85oC (-40o to 185oF) |
| Mounting | Uses an 8 pin octal socket. Requires a 600V-rated socket when used on system voltages greater than 300V such as Macromatic Catalog Number 70169-D. |
| Reset | Automatic upon correction of fault. |
| Series Features |
| PCP Series PHASE REVERSAL |
| Series Description: The PCP Series Three-Phase Monitor Relays continuously monitor all voltages to protect motors and equipment from expensive damage due to phase reversal. These products have an isolated relay output that is only energized if the three phases are in the proper A-B-C sequence. The relay output will remain open if any two phases are reversed. Phase Reversal Relays should be used in applications where motor direction is critical or sequence detection is required by Code. NOTE: these products provide protection against phase reversal only. If a product with more than phase reversal protection is required, see the Reference Guide at the beginning of this catalog section to select the correct product. The PCP Series is a true universal product, with two units that work on a wide variety of line-line voltages without any adjustment to cover more global applications. They utilize an industry-standard 8 pin octal socket. |
| Operation: |
|