Product Description
| This product has been Discontinued |
Description: Phase Monitor Relays • Type: Reversal, Loss, Undervoltage • Coil Voltage: 110-120 VAC • Contact Configuration: 1C SPDT • Mounting: 8 Pin Plug-in • Contact Current: 10 Amps • Indicator LED: Red LED on when all conditions are normal, and off when a fault condition has occurred
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Type | Reversal, Loss, Undervoltage |
| Coil Voltage | 110-120 VAC |
| Contact Configuration | 1C SPDT |
| Mounting | 8 Pin Plug-in |
| Contact Current | 10 Amps |
| Indicator LED | Red LED on when all conditions are normal, and off when a fault condition has occurred |
| Life | Full Load: 100,000 operations |
| Load (Burden) | 3VA |
| Mounting | Uses an Plug-in 8 Pin Octal socket. Requires a 600V-rated socket when used on system voltages greater than 300V (Macromatic Product Number 70169-D--see Page 16 of Catalog). |
| Output Contacts | 10A SPDT @ 240V AC, 1/3HP @ 240V AC (N.O.), 1/6HP @ 240V AC (N.C.) |
| Phase Loss | n/a |
| Phase Reversal | Unit trips if sequence of the three phases is anything other than A-B-C. |
| Reset | Automatic upon correction of fault |
| Response Times | Operate: 50ms, Release: 50ms |
| Temperature | -28° to 65°C (-20° to 150°F) |
| Transient Protection | 10,000 volts for 20 microseconds |