Product Description
Description: RM-2000 Coal Bed Methane Special/115V input
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage (V) | 115VAC |
| Input Tolerance (%) | ±10% |
| Maximum Input Power | 3W |
| Protection Class | NEMA 3R and/or UL Type 12 |
| Memory Capacity | Stores last 4 faults with time and date stamp includes voltage and current at time of trip |
| Communications Protocol | Modbus RTU |
| Communications Interface | RS-485 |
| Communications Range | 50 ft 4000 ft with separate isolated power supply |
| Communications Baud Rate (Bps) | 300 - 28800 |
| Address | A001 - A099 |
| Life | Mechanical: 100 000 actuations |
| Termination Type | 3 in.-lbs. |
| Mounting Method | Surface mountable using 4 screws |
| Operating Temperature | -20° to 70°C (-4° to 158°F) |
| Storage Temperature (F/C) | -30° to 70°C (-22° to 158°F) |
| Humidity | Up to 85% non-condensing |
| Dimensions | 6.40 in H x 6.10 in W x 1.10 in D (162.6 x 154.9 x 27.9 mm) |
| Series Features |
| RM2000 SERIES - Remote Monitor |
| Series Description: The RM2000 Series is a motor-monitoring device to be used in conjunction with the 777 family of products (excluding the P1 Series), 77C family of products and the Model 601 voltage monitors, via Modbus protocol with a communications module. The RM2000/777 motor management system combines unsurpassed electronic motor protection and critical, user- friendly, motor monitoring. The RM2000 has membrane keypad controls which allow both monitoring and control of a 777 MotorSaver® through an RS-485 network using Modbus RTU protocol. A second communication port allows monitoring and control of up to 99 RM2000 devices from a PLC, DCS, or SCADA system or a PC with Solutions software installed. The RM2000 will act as a repeater for its motor protector when accessed from the host computer or PLC. In addition to the monitoring functions, the RM2000 can be used to reset a tripped MotorSaver® or PumpSaver®. The RM2000 is easily mounted remotely and improves safety for service and operations personnel by allowing them to control and monitor the device without opening the electrical cabinet. Using the RM2000 is a simple, cost-effective method for aiding compliance with arc flash safety regulations. The enclosure and keypad assembly is water and ultraviolet light resistant. |
|