Product Description
Description: 2-Ch. Leak/Temp. Detector/120V/2 Form C/DIN Rail
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage (V) | 120 Vac nominal |
| Maximum Input Power | 2 |
| Input AC Line Frequency (Hz) | 50 / 60 |
| Input Logic | Direct or Inverted |
| Output Form | 2 Form C Isolated |
| Output Load Rating (VA) | Pilot Duty: 180 VA @ 120 Vac C150; General Purpose: 5 A @ 240 Vac |
| Sense Voltage | 5 Vdc pulsed (probe) |
| Sensitivity (Ohms) | TEMP input: Selectable 4 fixed; or 4.7 - 100 adjustable with DIP switches; SEAL: 4.7 - 100 adjustable |
| Termination Type | Torque: 6 in-lbs; Wire: 12-20 AWG; Depluggable Phoenix Contact - Series MSTB plugs (or equivalent) |
| Mounting Method | 35mm DIN rail or Surface Mount (#6 or #8 screws) |
| Operating Temperature | -20° to 55°C (-4° to 131°F) |
| Dimensions | 3.5 H x 2.08 W x 2.35 D in. (88.9 x 52.9 x 59.7 mm) |
| Series Features |
| PC-102 SERIES - Dual Seal-Leak Detector or Seal-Leak & Over-Temperature Detector |
| Series Description: The PC-102 is a dual-channel switch that provides dual protection against seal failures and over-temperature in submersible pumping applications. Both units have two form-C isolated output relays and two LEDs, which illuminate when each associated output relay is energized. The sensitivity adjustment (4.7k-100kOhms) allows you to define the input impedance at which the output relays will change state. The sensitivity for the over-temperature detector can be set to 4k Ohms with use of the DIP switches. |
|