1 - 8 ft. (0 - 1 ft. when using IR Fiber Optic Kit)
Acceptable Battery Type
9 Vdc alkaline battery
Operating Temperature
0° to 60°C (32° to 140°F)
Dimensions
5.5 H x 3.6 W x 1.13 D in. (139.7 x 91.4 x 28.6 mm)
Series Features
INFORMER - Remote diagnostic tool for use with single-phase pump relays
Series Description:The Informer is a hand-held diagnostic tool designed for use with single-phase models equipped with infrared LED transmitters (111-Insider-P; 231-Insider-P; 232-Insider; 111P; 233P; 233P-1.5; 234-P and 235P).
The Informer uses an infrared receiver to access information sent from the relay which can be helpful for troubleshooting the system.
Each Littelfuse single-phase model listed above is equipped with an infrared LED that transmits valuable information from the device. To retrieve this information, the Informers receiver must be directed toward the units LED transmitter and be within 8 feet of the unit. The green COMM STATUS light indicates when the Informer is receiving data from the unit. If communication is lost, the Informer will display the last values it received. The Informer will automatically shut off after two minutes of non-use.
An infrared adapter (IR Kit-12) is included with all new and updated Informers. This adapter allows communication with the unit without opening the panel door (for select models).
The Informer displays:
Model number
Real-time voltage, current, and power
Drywell and overload trip points
Calibration voltage
Restart delay setpoint and restart delay time remaining
CT size (if applicable)
Number of pump starts
Total run-time
Fault history for last 20, most recent, faults
Voltage, current, power, and run-time for each fault at time of the fault
Highest and lowest voltage and current since last calibration
