50 / 60 (50 will increase all delay timers by 20%)
Input Load Range (hp)
36894
Output Form
SPST
Output Load Rating (VA)
1 hp @ 240 Vac (17 A max.)
Restart Delay Range
Over/Under Voltage: 2 s; All other faults: Manual; 2 - 225 m
Trip Delay Range
Overcurrent: 5 s; Dry-well: 2 s
Overvoltage Trip Voltage (%)
265 Vac
Undervoltage Reset Voltage (%)
190 Vac
Overcurrent Trip Class
125% of calibration point
Underload (%)
Approx. 80% of calibration point
Power Consumption
?5 W
Mounting Method
Inside a Grundfos® control box
Operating Temperature
-40° to 70°C (-40° to 158°F)
Series Features
232-INSIDER - Single-Phase Pump Monitor
Series Description:The single-phase 232-Insider PumpSaver® fits inside 1?3, 1?2, 3?4, and 1 hp, 230 V Grundfos control boxes. The PumpSaver 232-Insider is designed to protect single-phase pumps from dry-well, dead-head, jammed impellers, overvoltage, and undervoltage conditions. Typical applications include residential water wells, commercial water wells, irrigation wells, and golf course systems.
A calibration adjustment allows the 232-Insider to be calibrated to your specific pumping application, reducing the possibility of false or nuisance tripping. A unique microcontroller-based voltage and current-sensing circuit constantly monitors the incoming power for fluctuations, overcurrent, and undercurrent. When an abnormality, such as loss of suction is detected, the 232-Insider deactivates its output relay and directly disconnects the pump motor. The 232-Insider then begins its user- selectable restart delay (dry-well recovery) timer. When the timer counts to zero or power is removed and reapplied, the 232-Insider reactivates its output relay and turns the pump back on. By leaving the restart delay knob in the reset position, the 232-Insider will operate in manual reset mode. An infrared LED communicates directly with a hand-held diagnostic tool called the Informer.
Series Applications:Residential and commercial water wells, Irrigation wells, Golf course systems
Proprietary microcontroller-based circuitry: Constant monitoring of voltage and current status for maximum protection
Adjustable restart delay: Allows user to select well recovery time delay after a dry-well condition n occurs, or to select manual reset
Built-in IR communications link: Used with the Informer, allows user to see stored faults, run time, and troubleshoot while the pump is running
LED indication: Provides status and diagnostics for troubleshooting
