Product Description
Description: Seal Leak Detector/110-120V/8-pin plug-in
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage (V) | 110 - 120 Vac nominal |
| Maximum Input Power | 5 |
| Input AC Line Frequency (Hz) | 50 / 60 |
| Output Form | SPDT |
| Output Load Rating (VA) | Pilot Duty: 480 VA @ 240 Vac; General Purpose: 10 A @ 240 Vac |
| Sense Voltage | 5 Vdc pulsed (probe) |
| Sensitivity (Ohms) | 4.7 - 100 |
| Protection Class | NEMA 1 |
| Termination Type | Torque (OT08-PC octal socket): 6 in-lbs; Wire: Stranded or solid 10 - 22 AWG |
| Mounting Method | DIN rail or surface mount (plug into OT08-PC socket) |
| Operating Temperature | -40° to 70°C (-40° to 158°F) |
| Storage Temperature (F/C) | -40° to 80°C (-40° to 176°F) |
| Humidity | 10 - 95% non-condensing per IEC 68-2-3 |
| Dimensions | 1.75 H x 2.38 W x 4.13 D in. (44.5 x 60.3 x 104.8 mm) |
| Series Features |
| 201-100-SLD - Single-Channel Seal-Leak Detector |
| Series Description: The model 201-100-SLD is an 8-pin plug-in style seal-leak detector to sense seal failures on submersible pumps. A microcontroller-based relay that monitors the shaft seal of a submersible pump motor. A resistive probe is installed in the seal cavity. If water leaks into the pump, the resistance measured by the probe decreases. When the resistance drops below the sensitivity setpoint, the unit will trip and the relay contacts will change state. The unit will automatically reset when a fault is cleared. |
|