Product Description
Description: 1-Phase Overload Relay/100-240V/1-9FLA
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage (V) | 100 - 240 Vac |
| Maximum Input Power | 10 |
| Input AC Line Frequency (Hz) | 50 / 60 |
| Output Form | SPDT - Form C |
| Output Load Rating (VA) | Pilot Duty: 480 VA @ 240 Vac B300; General Purpose: 10 A @ 240 Vac |
| Full Load Amp Range (A) | 1.0 - 2.5 (looped conductors required); 2.0 - 9.0 (direct) |
| Timing Accuracy (%) | 5% ±1 s |
| Rapid Cycle Timer (s) | 0; 2 - 500 s |
| Restart Delay Range | After Under/Overcurrent: 2 - 500 m/s; # of Restarts: Overcurrent: 0; 1; oc1; 2; oc2; 3; oc3; 4; oc4; A (Automatic); OCA; Undercurrent: 0; 1; 2; 3; 4; A (Automatic) |
| Repeat Accuracy (%) | Voltage: ±0.5% of nominal voltage; Current: ±1% (direct; no external CTs) |
| Overvoltage Trip Voltage (%) | 85V - HV setting |
| Undervoltage Trip Voltage | LV setting - 264 V |
| Voltage Accuracy (%) | ±1% |
| Overcurrent Trip Point | (20 - 100 A) MULT of 80 - 120% of CT primary |
| Overcurrent Trip Class | 5; J5; 10; J10; 15; J15; 20; J20; 30; J30; or lin (linear) |
| Undercurrent Trip Point | 0; 10 - 98 A MULT or 40 - 100% of CT primary |
| Undercurrent Trip Delay (s) | 2 - 60 s |
| Current Accuracy (%) | ±3% (<100 A direct) |
| Ground Fault Accuracy (%) | ±15% |
| Sensor Hole Size | Max conductor size: 0.65 in (with insulation) |
| Short Circuit (kA) | UL: 100; CSA: 10 |
| Surge Protection | IEC: 61000-4-5 Level 3 2 kV line-to-line; Level 4 4 kV line-to-ground |
| Protection Class | IP20; NEMA 1 (finger safe) |
| Pollution Degree | 3 |
| CT Ratio | 1 or 2 |
| Address | A01 - A99 |
| Termination Type | 7 in.-lbs. |
| Mounting Method | Surface mount (4 - #8 screws) or DIN rail mount |
| Operating Temperature | -20° to 70°C (-4° to 158°F) |
| Storage Temperature (F/C) | -40° to 80°C (-40° to 176°F) |
| Humidity | 10 - 95% non-condensing per IEC 68-2-3 |
| Dimensions | 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm) |
| Series Features |
| 77C Series - Single-Phase Current & Voltage Monitor |
| Series Description: The single-phase 77C unit is a fully-programmable, electronic overload relay designed to protect any motor drawing 2-800 full load A (external CTs are required above 90 A). Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application. The 77C and 777-HVR-SP (family of products) are for single-phase 100-240 V ac applications. All of the overload relays provide unsurpassed protection by combining overload, underload, and voltage in one unit. For standalone applications, the units incorporate a 3-digit LED display that is used for programming, providing real-time operational information, and displaying diagnostic codes to aid in troubleshooting a fault condition. These units also feature a communications network port that can be used with communication modules, listed in the 777 accessories section, to form a Modbus, DeviceNetTM, Profibus, or Ethernet network. Up to 99 units can be remotely monitored and controlled from a PC, PLC, or SCADA system, and data logging through a PC with the optional Solutions software. This capability allows for a simple, cost-effective way to meet new requirements for arc-flash safety. |
| Series Applications: Conveyor systems, HVAC equipment, Saws and grinders, Fan motors |
|