Product Description
Description: 5-Ch Intrinsically-Safe Only Switch/120V
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage (V) | 120 Vac |
| Input Tolerance (%) | ±10% |
| Maximum Input Power | 5 |
| Input AC Line Frequency (Hz) | 50 / 60 (50 will increase all delay timers by 20%) |
| Input Logic | Input/Output Channels: 5 channels |
| Output Load Rating (VA) | Pilot Duty: 480 VA @ 240 Vac B300; General Purpose: 7 A @ 240 Vac |
| Debounce Time Delay (s) | 2 |
| Sense Voltage | 5 Vdc continuous (probe) |
| Intrinsically Safe Circuit Location | Division 1 and 2; Class I Groups A B C D; Class II Groups E F G; Class III |
| Protection Class | IP20 (finger safe) |
| Termination Type | Torque: 3.5 to 4.5 in-lbs (max. 6 in.-lbs); Wire: 12 - 20 AWG |
| Mounting Method | 35mm DIN rail or Surface Mount (#6 or #8 screws) |
| Operating Temperature | -40° to 55°C (-40° to 131°F) |
| Humidity | 10 - 95% non-condensing per IEC 68-2-3 |
| Dimensions | 2.35 H x 3.7 W x 5.03 D in. (59.7 x 94.1 x 127.6 mm) |
| Series Features |
| ISS-105 SERIES - Five-Channel Intrinsically Safe Switch |
| Series Description: The ISS-105 is a smart five-channel intrinsically safe relay and pump controller. The ISS-105 can be configured for pump-up or pump-down applications or as a five-channel relay covering a wide variety of applications. The ISS-105 has a long list of features that are needed for multiple pump applications and can indicate low, high and out-of-sequence alarms. If an out-of-sequence alarm occurs, the skipped pump(s) will be started as intended. The Model ISS-105 can be set-up to do non-alternating control, alternating control and alternating control with one non-alternating pump. The non-alternating pump is intended for use with an emergency or jockey pump. The ISS-105 can start an emergency pump once every 50 cycles to keep it working freely. Using the built-in DIP switches, individual pumps can be disabled when taken out of service for repair or maintenance. |
|