Product Description
Description: Intrinsically-Safe/120V/1 Form C/latching/MSHA eval.
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage (V) | 120 Vac nominal |
| Maximum Input Power | 2 |
| Input AC Line Frequency (Hz) | 50 / 60 |
| Output Form | One Form C |
| Output Load Rating (VA) | Pilot Duty: 180 VA @ 120 Vac C150; General Purpose: 5 A @ 120 Vac |
| Sensor Mode | Differential / Latching; 1-channel or 2-channel switch |
| Sense Voltage | 5 Vdc pulsed (probe) |
| Sensitivity (Ohms) | 100 |
| Intrinsically Safe Circuit Location | Division 1 and 2; Class I Groups A B C D; Class II Groups E F G; Class III |
| Termination Type | Torque: 3.5 to 4.5 in-lbs (max. 4.5 in.-lbs); Wire: 12 - 20 AWG; Depluggable Phoenix Contact - Series MSTB plugs (or equivalent) |
| Mounting Method | 35mm DIN rail or Surface Mount (#6 or #8 screws) |
| Operating Temperature | -20° to 55°C (-4° to 131°F) |
| Dimensions | 3.5 H x 2.08 W x 2.35 D in. (88.9 x 52.9 x 59.7 mm) |
| Series Features |
| ISS-102 SERIES - Two-Channel Intrinsically Safe Switch |
| Series Description: The ISS-102 is a two-channel, intrinsically-safe switch designed for multiple uses including a pump-up/pump-down (latching) controller or two-channel switch. LEDs indicate the state of the intrinsically-safe inputs and output relays and user-selectable options are available including a variable resistance threshold for float inputs. The ISS-102 enclosure is surface or DIN rail mountable. -LC Each input channel is active when the corresponding switch is closed. When the lag input (CH2) is activated, the output closes. Applying latching logic, the output contact remains closed until the lead (CH1) and the lag (CH2) inputs are deactivated. Sensitivity is fixed at 100kOhms with a debounce time delay of 2 seconds. -DCS This dual-channel switch has two Form A output relays. Two LEDs illuminate the output state of their respective Form A relay. Resistance probes or switches can be used on its inputs. Sensitivity is fixed at 100kOhms with a debounce time delay of 0.5 seconds. -MC By selecting the proper functionality through the DIP switches, you can define a pump-up or pump-down, single or dual channel non-latching switch. The sensitivity adjustment (4.7k-100kOhms) allows you to define the input impedance at which the output relays (one Form A & one Form C) will change state, with a debounce time delay of 0.5 or 2 seconds. |
|