Input: 0.15 (max.); Digital input: 0.002 (typical)
Output Form
Form A and Form C Contactors
Output Load Rating (VA)
Pilot Duty: 480 VA @ 240 Vac B300; General Purpose: 5 A @ 240 Vac
Communications Interface
Profibus
Termination Type
Torque: 3 in-lbs; Wire: 12 - 20 AWG
Mounting Method
DIN rail or surface mount (w/two #8 screws)
Operating Temperature
-20° to 70°C (-4° to 158°F)
Storage Temperature (F/C)
-40° to 80°C (-40° to 176°F)
Humidity
10 - 95% non-condensing per IEC 68-2-3
Dimensions
3.4 H x 1 W x 5.46 D in. (86.4 x 25.4 x 127 mm)
Series Features
CIO-PR Module
Series Description:The CIO-PR module is a convenient, cost-effective Profibus interface device capable of providing discrete control and monitoring of motor starters, drives and other devices over a Profibus network.
The CIO-PR module provides four solid-state 24VDC inputs and two AC/DC rated relay outputs. It can function as a stand-alone I/O device or can be connected to any model 777-P series unit to relay real-time information and permit overload control over the network.
The CIO-PR module has flexible addressing standard and provides two connector styles for connecting to the Profibus network. The CIO-PR allows the use of simple, inexpensive 5-pin pluggable connectors or industry standard 9-pin D-sub connectors.
Stand-alone I/O or use with 777-P series overload relays
Four digital inputs
One dedicated reset input
Two Outputs: One Form C, SPDT / One Form A, SPST-NO
Cyclical Messaging: Read real-time information: Phase currents / Average current / Ground fault current / Phase voltages/ Average voltage / Power factor / Input states / Thermal capacity / Restart timer states / Fault flags
Network Control: Open/close output relays / Reset overload / Ease in system startup and commissioning
Compact size; reduced field wiring
DIN Rail or Surface Mountable
Unit sets flush with side of 777-P series overload relays
