Product Description
Description: Cross-Wired Alt.Relay/95-125V/8-pin plug-in
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage (V) | 95 - 125 Vac |
| Maximum Input Power | 5 |
| Input Current Range (A) | 0.04 |
| Input Impedance (Ohms) | 56000 |
| Output Form | Cross wired DPDT |
| Output Load Rating (VA) | 480 VA @ 240 Vac |
| Debounce Time Delay (s) | 0.5 |
| Mounting Method | DIN rail or surface mount (plug into OT08-PC socket) |
| Operating Temperature | -40° to 50°C (-40° to 122°F) |
| Dimensions | 1.75 H x 2.38 W x 4.13 D in. (44.5 x 60.3 x 104.8 mm) |
| Series Features |
| ALT SERIES - 8-pin Plug-in Alternating Relay |
| Series Description: The ALT series alternating relays are used to alternate between two loads. The ALT is commonly used in duplex pumping applications to balance the runtime of both pumps. The ALT-S is used in single high-level float applications. When the float switch opens, the alternating relay changes state, forcing the other pump to run the next time the float closes. All ALT relays have a built-in debounce feature that prevents the relay from changing state if the switch or float contact bounces momentarily. The ALT-X has an internal cross-connected relay and is used in dual high-level float applications. These floats are commonly referred to as lead and lag floats. The pumps alternate as in the ALT-S version but the cross- connected relay configuration allows both pumps to run simultaneously when both the lead and lag floats are closed These relays are also available with a built-in switch (SW option) that is used to manually force one of the pumps to run every time the float switch is closed. This is helpful when a pump has been removed for repair or for test purposes. In the case of the ALT-X-SW, the switch essentially forces one pump to be the lead pump, while still allowing the second to run when both floats are closed. |
|