Get A Quote
My Account
To ensure accuracy, please note that images may be representative. Refer to the product data sheet for detailed specifications.
| Manufacturer | Kanson / ISSC |
| Manufacturer Product Number | LLD-100 |
| Description | Resistance Sensitive Detectors; <=1 MOhm; 105-130 VAC, 50/60 Hz |
| Datasheet | Download Datasheet |
The Kanson / ISSC LLD-100 is a resistance sensitive detectors with 1 N.O. (solid state) output and rated 12 A continuous; 50 A inrush (one cycle); 100 mA minimum load, driven by a 105-130 VAC, 50/60 Hz input.
It controls the level of a conductive liquid, output on when resistance between probe and aluminum mounting plate is <=1 MOhm.
The setpoint covers <=1 MOhm between probe and common, so it is the conductivity of the liquid that decides the part.
The probe is pulsed with 12 VDC open circuit; peak current <1 mA max. rather than held at a steady potential, which is what stops it electroplating away in service.
It has Aluminum mounting plate (4 x 0.250 in holes) mounting and 3-pin terminal strip terminals.
| Category | |
| Manufacturer | Kanson / ISSC |
| Control Function | Output on when resistance between probe and aluminum mounting plate is <=1 MOhm |
| Level Sensing | Single point (one probe; mounting plate is the return) |
| Number of Probes | 1 (LLP-100) |
| Sensitivity Range | <=1 MOhm |
| Probe Voltage | 12 VDC open circuit; peak current <1 mA max. |
| Input Voltage | 105-130 VAC, 50/60 Hz |
| Output Type | Normally open solid state |
| Contact Configuration | 1 N.O. (solid state) |
| Output Rating | 12 A continuous; 50 A inrush (one cycle); 100 mA minimum load |
| Operating Temperature (°C) | -25...+70 |
| Mounting Type | Aluminum mounting plate (4 x 0.250 in holes) |
| Termination Style | 3-pin terminal strip |
| Dimensions | 5.00 x 5.00 in (127.0 x 127.0 mm) plate, 2.375 in (60.3 mm) deep |