Get A Quote
My Account
To ensure accuracy, please note that images may be representative. Refer to the product data sheet for detailed specifications.
| Manufacturer | Kanson / ISSC |
| Manufacturer Product Number | 1232-2-B-B |
| Description | Resistance Detectors; 2.0k-25k Ohm; 24 VAC/DC; DPDT; Base mount |
| Datasheet | Download Datasheet |
The Kanson / ISSC 1232-2-B-B is a resistance detectors with DPDT output and rated 10 A @ 240 VAC maximum, driven by a 24 VAC/DC input.
It controls the level of a conductive liquid, output operates when probe resistance is below the set resistance (after on-delay); releases when above to after on-delay the tank.
The setpoint covers 2.0k-25k Ohm between probe and common, so it is the conductivity of the liquid that decides the part.
The probe is pulsed with 13 V maximum open circuit; 5 mA maximum short circuit current rather than held at a steady potential, which is what stops it electroplating away in service.
It has Base mounting and Terminal block on face of unit terminals.
| Category | |
| Manufacturer | Kanson / ISSC |
| Control Function | Output operates when probe resistance is below the set resistance (after on-delay); releases when above (after off-delay) |
| Sensitivity Range | 2.0k-25k Ohm |
| Probe Voltage | 13 V maximum open circuit; 5 mA maximum short circuit current |
| Pickup Delay | 0.05-1.0 s (adjustable) |
| Reset Delay | 0.05-1.0 s (adjustable) |
| Repeatability | <=0.5% |
| Input Voltage | 24 VAC/DC |
| Input Operating Range | +/-10% of nominal |
| Rated Power | 10 VA maximum |
| Output Type | Electromechanical relay |
| Contact Configuration | DPDT |
| Output Rating | 10 A @ 240 VAC maximum |
| Operating Temperature (°C) | 0...+70 |
| Mounting Type | Base mount |
| Termination Style | Terminal block on face of unit |
| Housing Material | Metal |
| Dimensions | 2.875 x 3.06 in (73.0 x 77.7 mm), depth 4.25 in (108.0 mm) |