Product Description
Description: Time Delay Relay • Re-Triggerable Single Shot • Operating voltage: 120 VAC • Type: C/MOS digital circuitry • Range: 100.0-1000.0 min • Contact Configuration: SPST • Contact Current: 1 A • Mounting : Base Mount • Termination: 1*4" Quick Connect • Adjustment: Local Adjsut
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Operating voltage | 120 VAC |
| Type | C/MOS digital circuitry |
| Range | 100.0-1000.0 min |
| Contact Configuration | SPST |
| Contact Current | 1 A |
| Mounting | Base Mount |
| Termination | 1*4" Quick Connect |
| Adjustment | Local Adjsut |
| Repeat Accuracy | ±0.5% Under Fixed Conditions |
| Setting Accuracy | ±10% |
| Reset Time | 50 Milliseconds Maximum |
| Recycle Time | 100 Milliseconds During Timing 50 Milliseconds After Timing |
| Rating | 1 Amp Steady State, (10 Amp Inrush, 20mA Min.) |
| Life | 100,000,000 Operations Minimum Under Full Load |
| Transient | ±1500 Volts for 150 Microseconds |
| Polarity | DC Units Are Reverse Polarity Protected |
| Dielectric Breakdown | 1500 Volts RMS Min |
| Operating Temperature | -20°C to +80°C |
| Storage Temperature | -30°C to +85°C |
| Humidity | 95% Relative Non-Condensing |
| Series Features |
| QOS Series |
| Series Description: Binary Digital Encapsulated Time Delay Modules |
| Operation: Retriggerable One Shot: Power must be applied to the input at all times prior to and during timing. Upon closure of the initiate switch (momentary or maintained) the output contact transfers and the time delay begins. At the completion of the pre-selected delay period, the output contact reverts to its original position. NOTE: Momentary or maintained closure of initiate switch dur- ing timing will reset the time delay. |
|