Product Description
Description: Time Delay Relay • Delay on Make • Operating voltage: 12 VDC • Type: C/MOS digital circuitry • Range: 1.0-60.0 se • Contact Configuration: SPST • Contact Current: 1 A • Mounting : Base Mount • Termination: 1*4" Quick Connect • Adjustment: External Adjust
| Product Information | | Resources |
| Manufacturer | Infitec | | Product Category | Time Delay Relay | | Product Sub Category | Delay on Make | | Series | QMS Series |
| | |
Product Attribute
| Attribute Value
|
| Operating voltage | 12 VDC |
| Type | C/MOS digital circuitry |
| Range | 1.0-60.0 se |
| Contact Configuration | SPST |
| Contact Current | 1 A |
| Mounting | Base Mount |
| Termination | 1*4" Quick Connect |
| Adjustment | External Adjust |
| Repeat Accuracy | ±0.5% Under Fixed Conditions |
| Setting Accuracy | ±10% |
| Reset Time | 50 Milliseconds Maximum |
| Recycle Time | 100 Milliseconds During Timing
50 Milliseconds After Timing |
| Rating | 1 Amp Steady State, (10 Amp Inrush, 20mA Min.) |
| Life | 100,000,000 Operations Minimum Under Full Load |
| Transient | ±1500 Volts for 150 Microseconds |
| Polarity | DC Units Are Reverse Polarity Protected |
| Dielectric Breakdown | 1500 Volts RMS Min |
| Operating Temperature | -20°C to +80°C |
| Storage Temperature | -30°C to +85°C |
| Humidity | 95% Relative Non-Condensing |
| QMS Series |
| Series Description: Binary Digital Encapsulated Time Delay Modules |
| Operation: Delay on Make: Upon application of power to the input terminals, the time delay begins. At the completion of the pre-selected time delay, the output contact transfers. Reset is accomplished by removal of input power. There is no false output when reset during timing. |
- C/MOS Digital Circuitry
- Time Delays To 1000 Minutes
- No First Cycle Effect
- Fully Solid State And Encapsulated
- 0.5% Repeat Accuracy
- Seven Different Modes Of Operation
- Output Rated at 1 Ampere Continuous, 10 Amperes Inrush
- Fixed, Local Or Externally Adjustable Time Delays
- Small Size
- UL/cUL Recognized
|
