Product Description
Description: Time Delay Relay • Delay on Make, Normally Closed • Operating voltage: 120 VAC • Type: C/MOS digital circuitry • Range: 3.0-100.0 min • Contact Configuration: SPST • Contact Current: 1 A • Mounting : Base Mount • Termination: 1*4" Quick Connect • Adjustment: External Adjust
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Operating voltage | 120 VAC |
| Type | C/MOS digital circuitry |
| Range | 3.0-100.0 min |
| Contact Configuration | SPST |
| Contact Current | 1 A |
| Mounting | Base Mount |
| Termination | 1*4" Quick Connect |
| Adjustment | External Adjust |
| Repeat Accuracy | ±0.5% Under Fixed Conditions |
| Setting Accuracy | ±10% |
| Reset Time | 50 Milliseconds Maximum |
| Recycle Time | 100 Milliseconds During Timing 50 Milliseconds After Timing |
| Rating | 1 Amp Steady State, (10 Amp Inrush, 20mA Min.) |
| Life | 100,000,000 Operations Minimum Under Full Load |
| Transient | ±1500 Volts for 150 Microseconds |
| Polarity | DC Units Are Reverse Polarity Protected |
| Dielectric Breakdown | 1500 Volts RMS Min |
| Operating Temperature | -20°C to +80°C |
| Storage Temperature | -30°C to +85°C |
| Humidity | 95% Relative Non-Condensing |
| Series Features |
| QCS Series |
| Series Description: Binary Digital Encapsulated Time Delay Modules |
| Operation: Delay on Make, Normally Closed: The output is in a normally closed state. Upon application of power to the input terminals, the output contact transfers and the time delay begins. At the completion of the time delay the output contact drops out. Removal of input power from terminal 3 resets the delay and the output contact reverts to its original closed position. |
|