Product Description
Description: Time Delay Relay • Delay on Break • Operating voltage: 24 VAC • Type: C/MOS digital circuitry • Range: 3.0-100.0 min • Contact Configuration: SPST • Contact Current: 1 A • Mounting : Base Mount • Termination: 1*4" Quick Connect • Adjustment: External Adjust
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Operating voltage | 24 VAC |
| Type | C/MOS digital circuitry |
| Range | 3.0-100.0 min |
| Contact Configuration | SPST |
| Contact Current | 1 A |
| Mounting | Base Mount |
| Termination | 1*4" Quick Connect |
| Adjustment | External Adjust |
| Repeat Accuracy | ±0.5% Under Fixed Conditions |
| Setting Accuracy | ±10% |
| Reset Time | 50 Milliseconds Maximum |
| Recycle Time | 100 Milliseconds During Timing 50 Milliseconds After Timing |
| Rating | 1 Amp Steady State, (10 Amp Inrush, 20mA Min.) |
| Life | 100,000,000 Operations Minimum Under Full Load |
| Transient | ±1500 Volts for 150 Microseconds |
| Polarity | DC Units Are Reverse Polarity Protected |
| Dielectric Breakdown | 1500 Volts RMS Min |
| Operating Temperature | -20°C to +80°C |
| Storage Temperature | -30°C to +85°C |
| Humidity | 95% Relative Non-Condensing |
| Series Features |
| QBS Series |
| Series Description: Binary Digital Encapsulated Time Delay Modules |
| Operation: Delay on Break: Power must be applied to the input at all times prior to and during timing. Upon closure of the initiate switch, the output contact transfers and remains transferred if no further action is taken. When the initiate switch is opened, the time delay begins. At the completion of the pre-selected delay period the output contact reverts to its original position. Closure of initi- ate during timing will reset the delay period. Removal of input power will reset the control. |
|