Product Description
Description: Time Delay Relay • Single Shot • Operating voltage: 120 VAC • Type: C/MOS digital circuitry • Range: 5.0-180.0 sec • Contact Configuration: SPDT Isolated • Contact Current: 20 A • Mounting : Base Mount • Termination: 1/4" Quick Connect • Adjustment: Remote Adjustment
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Operating voltage | 120 VAC |
| Type | C/MOS digital circuitry |
| Range | 5.0-180.0 sec |
| Contact Configuration | SPDT Isolated |
| Contact Current | 20 A |
| Mounting | Base Mount |
| Termination | 1/4" Quick Connect |
| Adjustment | Remote Adjustment |
| Repeat Accuracy | ±0.5% Under Fixed Conditions |
| Setting Accuracy | ±10% |
| Reset Time | 50 Milliseconds Maximum |
| Recycle Time | 100 Milliseconds |
| Time Delay vs. Voltage and Temperature | ±5% |
| Electrical Life | Full Load - 100,000 Operations |
| Mechanical Life | 10,000,000 Operations |
| Transient | ±1500 Volts for 150 Microseconds |
| Polarity | DC Units Are Reverse Polarity Protected |
| Dielectric Breakdown | 1500 Volts RMS Minimum |
| Series Features |
| KSKR Series |
| Series Description: Medium/High Power Timing Controls |
| Operation: Single Shot: Power must be applied to the input at all times prior to and during timing. Upon closure of the initiate switch (momentary or maintained) the output contacts transfer and the time delay begins. At the completion of the pre-selected time delay, the output contacts revert to their original position. Removal of input power will reset the control. Closure of initiate during timing will have no effect. |
|